Skip to main content
Download PDF

Community analysis of the abundance and diversity of biting midge species (Diptera: Ceratopogonidae) in three European countries at different latitudes

Parasites & Vectors volume 11, Article number: 217 (2018) Cite this article

Abstract

Background

The outbreaks of bluetongue and Schmallenberg disease in Europe have increased efforts to understand the ecology of Culicoides biting midges and their role in pathogen transmission. However, most studies have focused on a specific habitat, region, or country. To facilitate wider comparisons, and to obtain a better understanding of the spread of disease through Europe, the present study focused on monitoring biting midge species diversity in three different habitat types and three countries across Europe.

Methods

Biting midges were trapped using Onderstepoort Veterinary Institute light traps at a total of 27 locations in Sweden, the Netherlands and Italy, comprising farm, peri-urban and wetland habitats. From July 2014 to June 2015 all locations were sampled monthly, except for during the winter months. Trapped midges were counted and identified morphologically. Indices on species richness, evenness and diversity were calculated. Community compositions were analysed using non-metric multidimensional scaling (NMDS) techniques.

Results

A total of 50,085 female midges were trapped during 442 collection nights. More than 88% of these belonged to the Obsoletus group. The highest midge diversity was found in Sweden, while species richness was highest in the Netherlands, and most specimens were trapped in Italy. For habitats within countries, diversity of the trapped midges was lowest for farms in all countries. Differences in biting midge species communities were more distinct across the three countries than the three habitat types.

Conclusions

A core midge community could be identified, in which the Obsoletus group was the most abundant. Variations in vector communities across countries imply different patterns of disease spread throughout Europe. How specific species and their associated communities affect disease risk is still unclear. Our results emphasize the importance of midge diversity data at community level, how this differs across large geographic range within Europe, and its implications on assessing risks of midge-borne disease outbreaks.

Background

Worldwide around 1400 species of Culicoides (biting midges, Diptera: Ceratopogonidae) have been described [1]. At present, the European Interactive Culicoides Key [2, 3] includes 110 species. A minority of these species has thus far been described as important vectors for arthropod-borne viruses (arboviruses) [4, 5]. Biting midges from the Culicoides Obsoletus group [6,7,8,9,10,11], C. imicola Kieffer, 1913 [12], C. pulicaris (Linnaeus, 1758) [11, 13, 14], and C. punctatus (Meigen, 1804) [10, 14,15,16,17,18,19] are important vectors occurring in Europe. Of the over 50 viruses isolated from biting midges, several are of major international significance [4]. Animal diseases caused by viruses such as Akabane virus, bovine ephemeral fever virus, African horse sickness virus (AHSV) and bluetongue virus (BTV) are all transmitted by biting midges. Both infection with AHSV and bluetongue are of such international significance that they are listed by the World Organisation for Animal Health (OIE) as focus diseases that can have serious socio-economic or public health consequences, and are of major importance for international trade [20].

Outbreaks of midge-borne viruses in Europe, e.g. BTV since 2006, and more recently Schmallenberg virus (SBV) during 2011–2013 [21, 22], have had a great impact on the European livestock sector [23,24,25]. Milk production by infected livestock is often reduced, and the virus affects unborn calves and lambs when the mother becomes infected during gestation, resulting in non-viable offspring. These impacts, in addition to livestock movement restrictions, result in considerable economic losses. Factors such as intensified transportation of livestock and the rise in global temperature may further increase the risk of arbovirus outbreaks in Europe. Rising temperatures create opportunities for vector populations to increase rapidly, and allow viruses to complete their extrinsic incubation period in vectors faster, which both imply an increased potential for pathogen transmission [26].

Although research following the outbreaks of BTV and SBV has improved our knowledge of the ecology of Culicoides biting midges, these studies often focus on a specific habitat, region, or country [27,28,29,30,31]. Therefore, it is difficult to make direct comparisons among the results of these studies. Thus, to facilitate wider comparisons on biting midge communities at European level, we aimed to simultaneously sample midge species distribution, abundance, and diversity in three habitat types within three representative countries at different latitudes in Europe, where large differences in environmental characteristics could be expected.

Methods

Midge trapping

Adult midges were trapped using Onderstepoort Veterinary Institute (OVI) light traps. A 30 cm 8 W fluorescent black light tube was used to attract midges [1]. When in close proximity of the trap, midges were sucked in by the down-draught fan, which was powered by the main grid or a 12 V, 24–32 Ah battery [14, 17, 32]. The top of the trap was placed at a height of 1.5–2 m and traps were at least 100 m apart to prevent interference between them. The collection bucket had a capacity of 500 ml and larger insects were excluded by polyester netting (mesh size 2–4 mm) placed around the light source of the trap. The bucket was filled with 50 ml water-soap solution.

Sampling procedures

Traps were placed in three countries at different latitudes: Sweden (surroundings of Linköping 58°24'38.9"N, 15°37'17.5"E), the Netherlands (surroundings of Wageningen 51°57'53.3"N, 5°39'46.4"E), and Italy (surroundings of San Benedetto del Tronto 42°56'58.1"N, 13°52'42.6"E). Within each country, farm, peri-urban and wetland habitats were selected. Selection criteria for habitat type and trap location have been described in [33]. In brief, each habitat type was represented by three unique sampling locations. Traps were positioned in these locations within 50 m of open stables of dairy cattle (‘farm’), a residential property (‘peri-urban’) or standing water (‘wetlands’). Habitat types mostly matched the classification of the CORINE European Land cover database [34].

From July 2014 to June 2015, except for the months December, January and February (and March for Sweden), monthly collections were performed for six consecutive days in each of the countries. Traps were active for 24 h and were emptied and rotated among the sampling locations between 08:00 h and 17:00 h the next day. Midges were sorted and stored at -20 °C in Eppendorf tubes containing 70% ethanol solution.

Sample identification

All female midges were identified to species level in collections that contained less than 100 individual midges. For collections that contained more than 100 midges (14% of the collections), a random sub-sample of at least 50 individuals was identified as an estimation of the species composition of the total collection. All identifications were performed using the Interactive Identification Key for Culicoides (IIKC) [2, 3]. Morphologically similar species were recorded as belonging to a group or complex [35, 36].

Statistical analyses

Species diversity indices were calculated with the Simpson’s Index of Diversity: \( 1-D=1-\frac{\sum {n}_i\left({n}_i-1\right)}{N\left(N-1\right)} \), Shannon-Wiener Diversity Index: \( {H}^{\prime }=-\sum \limits_{i=1}^R{p}_i\ln \left({p}_i\right) \), and the Shannon-Wiener evenness: \( E=\frac{H^{\prime }}{\ln (S)} \) . Diversity indices were calculated for each of the three countries as well as for farm, peri-urban and wetland habitats. To better understand whether sufficient trapping efforts had been made for a reasonable estimate of species diversity, a rarefaction curve of the species and the number of trapped midges was created with the rarecurve function within the vegan version 2.9.2. [37] package in R version 3.2.3. [38].

Non-metric multidimensional scaling (NMDS) analyses were used to evaluate the combined effects of country, habitat and diversity on the midge community composition [39]. An NMDS analysis can deal with abundant null measures in a dataset and calculates a reliable best model fit for shortest distances between the elements. The degree of stress calculated within this analysis indicates the reliability of the plot that is generated with NMDS, whereby lower stress corresponds to a higher reliability of the plot. For values above 0.3 the NMDS ordination plot is considered arbitrary. For NMDS analyses, the metaMDS function with the Bray-Curtis dissimilarity metric was used. All data were analysed using the statistical software package R version 3.2.3. [38].

Results

A total of 442 trap collections were performed in Sweden, the Netherlands and Italy (Table 1). In 305 (69%) of these collections one or more biting midges were trapped, whereas in the remainder of the collections (31%), no biting midges were trapped. A total of 50,729 biting midges were trapped during this study. Of these specimens, 7818 (15.4%) female midges were identified to species level. After identification, a total of 50,085 female (98.7%) biting midges were estimated to be trapped. Other individuals either were males or damaged to the extent that they could not be identified morphologically. A total of 45 midge species were found for the three countries combined. Of all female biting midges trapped during the field study, the number of specimens trapped was highest for the Obsoletus group (88.6%), followed by C. punctatus (2.3%), C. pulicaris (2.2%) and C. festivipennis (Kieffer 1914) (1.6%).

Table 1 Midge species diversity. Estimators of taxonomic diversity with values for the Simpson’s Index of Diversity, Shannon-Wiener diversity and Shannon-Wiener evenness for three habitats (farms, peri-urban and wetlands) in three countries (Sweden, the Netherlands and Italy)
Full size table

The rarefaction curves for each of the three countries are beyond their exponential growth and start to level off (Fig. 1). Although more sampling efforts would increase the number of species expected to be found (mostly in Sweden and the Netherlands), we believe that our sampling effort was sufficient for obtaining a representative number of species for the three countries.

Fig. 1
figure 1

Rarefaction plot of sampling effort. The plot shows the number of species expected to be found for the number of individuals sampled for Sweden (blue), Italy (green) and the Netherlands (orange)

Full size image

Although the lowest numbers of samples and specimens were trapped in Sweden, the highest species diversity was found there. The lowest values of species diversity were found in Italy, but most specimens were trapped in this country (Table 1). The lowest midge species diversity was found at farms in all countries. The highest midge species diversity was found for midges trapped in peri-urban habitats in Sweden and the Netherlands, while the midge diversity was almost similar for peri-urban and wetlands in Italy (Table 1). Catches from peri-urban habitats had the lowest number of specimens, while the highest number of specimens were trapped at farms in all countries.

From the 4074 female midges trapped in Sweden, 18 species were identified. The most common species were from the Obsoletus group (47%), C. pulicaris (22%) and C. achrayi (Kettle & Lawson, 1955) (10%) (Table 2). The dominating species among the 3,267 females trapped on farms were from the Obsoletus group (54%) and C. pulicaris (27%). From the 46 female midges trapped in peri-urban habitats, C. kibunensis (Tokunaga, 1937) (28%) and C. vexans (Staeger, 1839) (22%) were the most common, whereas the 761 specimens from wetlands in Sweden were dominated by C. achrayi (31%) and C. festivipennis (27%).

Table 2 Midge species abundance. List of midge species with number of specimens for each country (Sweden, the Netherlands and Italy) and habitat type (farms, peri-urban and wetlands)
Full size table

The Netherlands had the highest species richness with 35 species identified among 11,985 female midges trapped during the study period. The most common species were from the Obsoletus group (78%), C. punctatus (8%) and C. festivipennis (5%). For wetland and farm habitats the most abundant species were comprised of those species. The 185 midges trapped from peri-urban habitats were dominated by C. kibunensis (31%) and C. brunnicans (Edwards, 1939) (16%).

Of the 20 species trapped in Italy, the Obsoletus group was by far the most dominant with 97% of all 34,026 trapped female midges. The trapped midges from farm (33,682) and peri-urban (124) habitats were dominated by the Obsoletus group, although C. pulicaris (1%) and C. duddingstoni Kettle & Lawson, 1955 (27%) were also trapped more than other species in the two habitats, respectively. From the 220 midges trapped in Italian wetland habitats, C. circumscriptus Kieffer, 1918 (44%) and C. submaritimus Dzhafarov, 1962 (18%) were most abundant.

Of all midge species trapped, 38% (17/45) were unique to one of the three habitat types. Three species occurred exclusively at farms, two species in peri-urban habitats and 12 species only in wetland habitats (Fig. 2). Figure 3 shows that more than half of the 45 species identified were trapped in only one of the countries (26/45, 58%), while 20% (9/45) of the species were trapped in all three countries. This core community included the most abundant species from the three countries: the Obsoletus group, C. punctatus, C. pulicaris, C. festivipennis and C. achrayi.

Fig. 2
figure 2

Venn diagram of habitats. Diagram shows the absolute presence of midge species found in farm (red), peri-urban (grey) and wetland (blue) habitats

Full size image
Fig. 3
figure 3

Venn diagram of countries. Diagram shows the absolute presence of midge species found in Sweden (blue), the Netherlands (orange) and Italy (green)

Full size image

Combining the presence and abundance of different midge species trapped for the different countries and habitat types into one statistical analysis provides additional information about vector communities associated with specific regions. Dissimilarity matrices resulting from NMDS analyses show clear differences in biting midge community composition among the areas investigated in countries at different latitudes (P = 0.002, stress = 0.084) (Fig. 4a). Differences in communities were not found among habitats (P = 0.976, stress = 0.084) (Fig. 4b). However, looking at habitats within each country, midge communities were found to be different for some of the habitats (Fig. 4c). Midge communities among Dutch (P = 0.048, stress = 0.081) and Italian (P = 0.040, stress = 0.0594) habitats were significantly different from each other. For habitats in Italy this difference was mainly driven by the wetland habitat (Fig. 4c). Midge communities among habitats in Sweden were comparable (P = 0.577, stress = 0.099).

Fig. 4
figure 4

Results of NMDS analyses. a Figure shows midge community compositions for Sweden (S), the Netherlands (N) and Italy (I). b NMDS analysis for farms (F), peri-urban (P) and, wetland (W) habitats based on number of midges trapped per species in each habitat and country. c NMDS analysis based on number of midges trapped per species at each location in each country and habitat (Sweden in blue: SF, SP and SW; the Netherlands in orange: NF, NP and NW; Italy in green: IF, IP and IW). The Bray-Curtis dissimilarity index was used to determine dissimilarities among midge community compositions. Stress value = 0.084 for panels a and b, which indicates a very good fit of the model. Stress value = 0.216 for panel c, which indicates a suspect fit of the model

Full size image

Discussion

Biting midge community composition clearly differed among the areas we investigated at different latitudes. This is illustrated by the diversity indices (Table 1), which was highest in Sweden, followed by the Netherlands, and then Italy. In addition, the Venn-diagram (Fig. 3) shows that 57% of the trapped midge species were found in only one of the countries. Finally, the dissimilarity matrix (Fig. 4a) distinguishes distinct midge communities among countries. Although communities varied among the areas investigated for the countries, a core community of midges seems to be present nevertheless (Fig. 3). This core community includes the five most abundant species from the three countries: the Obsoletus group, C. punctatus, C. pulicaris, C. festivipennis and C. achrayi. While this core community occurs throughout Europe and across different habitats, it cannot be assumed that their contribution to disease spread is similar in all countries as temperature, interaction with other (host) species, and genetic variation within midge species [4, 40] also vary throughout Europe. However, these known midge vector species are present in a core community throughout Europe, and with rising temperature as a consequence of climate change, and continued increase in animal transport, it is expected that disease outbreaks will increase throughout Europe. Increasing temperature will simultaneously affect the rapid increase of midge vector populations, and at the same time allow viruses to complete their extrinsic incubation period in vectors faster, which both imply an increased potential for pathogen transmission [26].

While community composition clearly differed among the sampled areas at different latitudes, communities were similar among habitat types (Fig. 4a, b). However, when differentiating habitats within countries, there were marked habitat effects on community composition (Fig. 4c). Habitat communities from farm, wetland, and peri-urban sites differed within the Netherlands and Italy, while communities in Sweden were more similar to each other. These results are comparable to diversity and community composition found for mosquitoes in Europe [33]. Both mosquito and biting midge communities show clear differences among areas in the three representative countries, while these communities are different for habitats only within the countries studied. This suggests that local habitat factors can be important for vector community composition, but that ecological factors at large geographical distances between sites have a more significant impact.

Some of the biting midge species that were morphologically identified, were thus far not known to be present in the studied countries. Of 18 midge species identified for Sweden, two species (C. cameroni and C. fagineus) could not be confirmed by the IIKC [2] or literature [17, 41] (see Additional file 1: Table S1 for an overview). For the Netherlands, 12 species (C. brunnicans, C. cameroni, C. caucoliberensis, C. derisor, C. indistinctus, C. jurensis, C. longipennis, C. manchuriensis, C. picturatus, C. reconditus, C. simulator and C. tauricus) were not earlier described [10, 42, 43], and for Italy three species (C. achrayi, C. cameroni and C. vexans) were not found in literature [44, 45] or distribution maps of the IIKC. Because most of these species are known to be present in countries surrounding the countries studied here, we expect that the distribution is correct but was simply not confirmed before. We will continue to work with these samples and confirm the findings with barcoding techniques before adding them to current distribution lists.

From the European core midge community identified in this study, at least three species are (potential) vectors of pathogens. The Obsoletus group was the most abundant trapped in all countries, especially in farm habitats. Species in this group are known to transmit both BTV and SBV [6,7,8,9,10,11], and considered the most important midge vector species in Europe. However, the Obsoletus group consists of several species [C. chiopterus (Meigen, 1830); C. dewulfi Goetghebuer, 1936; C. obsoletus (Meigen, 1818) (s.s.); C. scoticus Downes & Kettle, 1952; and C. montanus Shakirzjanova, 1962] for which morphological identification is difficult and very laborious [41]. Culicoides identification remains a challenge, especially for specific groups or complexes of species [3, 36]. As new techniques such as DNA (barcode) sequencing and MALDI TOF (matrix assisted laser desorption/ionisation time of flight) mass spectrometry [31, 36, 46, 47] become available for identification, it will be easier to process large numbers of specimens. However, correct reference databases, morphological identifications, and the link with ecology remain essential components in Culicoides research. Therefore, the European Interactive Identification Key for Culicoides (IKCC) developed by Mathieu et al. [2] is a useful tool to obtain accurate morphological identifications. Those species that are difficult or impossible to separate by morphological identification, such as the Obsoletus group, can be further identified with molecular tools. Although species in the Obsoletus group are recognized as important potential vectors [48], it remains unknown what the species-specific (within the Obsoletus group) contribution to pathogen transmission is. Priority should therefore be given to investigate the Obsoletus group composition in more detail, to better understand disease dynamics.

The other two species found in this study that are (potential) vectors of pathogens were C. punctatus and C. pulicaris. These species were trapped in similar numbers and are known to transmit BTV and SBV [10, 11, 13,14,15,16,17,18,19]. Both species were found in all habitats and countries, although C. punctatus was mainly found in Dutch wetlands, while C. pulicaris was mostly present at farms in Sweden and Italy. One of the most important European BTV vectors for southern Europe, C. imicola, was not trapped during this study. Our trapping sites in Italy were further north compared to the known distribution of C. imicola [49], and results can therefore not be extrapolated for the most southern parts of Europe where C. imicola is present.

Although our sampling effort was comprehensive, as can be deduced from the rarefaction plot (Fig. 1), the study was carried out in a relatively limited area. Culicoides diversity found in our trappings is, therefore, not representative for the countries as a whole. In addition, trapping with a single trap type may not accurately represent midge fauna diversity [42, 50, 51]. Nevertheless, because of the consistent study design and use of the same trap type, results can be compared among the three areas in each country and habitats in this study. Midge species and their abundance can be under- or over-estimated compared to the biting rate on livestock animals [52]. Although mostly female biting midges were trapped, these were most likely not host-seeking midges, as they were attracted by a UV-light source [53]. The exact attraction mechanism for female midges towards the trap is thus far unknown. Nonetheless, the OVI trap seems to be the only effective midge trap currently available [54], and this stresses the need for appropriate monitoring methods against biting midges.

A study in Germany showed that adult midges can be trapped during winter months [16]. Although midge numbers captured in our traps were reduced in the months just before and after the winter period, it is not clear whether midges ceased their activity in our study. In addition to their activity during winter, the larval habitats of known midge vectors have not been extensively investigated [55,56,57,58]. With more knowledge on the habitats for both Culicoides larvae and adults, it will be possible to better understand the factors influencing differences in communities among countries and habitats.

Although the current study revealed differences in biting midge communities among habitats within countries, the underlying factors for this were not identified. Biting midge species diversity was surprisingly high in peri-urban habitats (Table 1), possibly as only few specimens of different species were captured in comparable numbers in this habitat type. In contrast, diversity was lowest at farms in all three countries, which could be explained by the high abundance of the Obsoletus group. Several of the farm collections had high abundance of midges and were therefore sub-sampled for identification. A few individuals of new species may be found if all individuals of farm samples would be identified. However, testing this scenario by simulating additional species in our dataset did not change our conclusions on diversity indices and the dominance of the Obsoletus group in farm habitats. The overwhelming abundance of this species group in farm habitats suppresses the influence on diversity measures of other species occurring on farms. Possibly, specific larval or adult habitats are present on farms that cause species from the Obsoletus group to flourish, while other species may not take advantage of these habitats.

Chaves et al. [59] suggested that lower diversity of vector communities is expected to increase the risk of amplification and spread of a vector-borne disease, because lower vector species diversity is thought to be correlated with higher relative abundance of some species within the community. This is in line with our findings, since the country (Italy) and habitat (farms) with the lowest diversity indices had the highest abundance of midges from the Obsoletus group. On the other hand, a theoretical study by Roche et al. [60] suggested that greater vector species richness leads to higher abundance, and can therefore amplify pathogen transmission. These authors showed that specific vector species in these complex community dynamics could be essential in epidemic take-off, even if these vectors are weakly susceptible to pathogen infection. Given that vector-borne diseases would require a set of multiple species that together influence the rate of transmission, understanding the species composition of vector communities and their interactions with pathogens is becoming increasingly important. Ultimately, entomological field data should be used for the development of mathematical and statistical models, to more accurately assess the effect of environmental factors on midge population dynamics and how this influences disease risks.

Conclusions

A core European midge community could be identified, with important disease vector species from the Obsoletus group, C. punctatus and C. pulicaris, as the most abundant in this core community. The presence of a core community throughout Europe suggests that disease dynamics can be homogenous, since the core community is present in all countries and habitats. However, in-depth analysis of the complete midge community composition showed that differences were more distinct among countries than habitat types. In other words, although some midge species are found throughout Europe, distinctive communities can be found within each country. This suggests that specific species within countries may impose a more heterogeneous disease dynamics than expected when only looking at the core community. Although we have elucidated how species communities differ among countries and habitats, it is still unclear how these specific species and their associated communities affect disease risk.

Abbreviations

AHSV:

African horse sickness virus

BTV:

Bluetongue virus

CORINE:

Coordination of information on the environment

IIKC:

Interactive Identification Key for Culicoides

NMDS:

Non-metric multidimensional scaling

OVI:

Onderstepoort Veterinary Institute

SBV:

Schmallenberg virus

References

  1. Mehlhorn H, Walldorf V, Klimpel S, Jahn B, Jaeger F, Eschweiler J, et al. First occurrence of Culicoides obsoletus - transmitted bluetongue virus epidemic in central Europe. Parasitol Res. 2007;101(1):219–28.

    Article  PubMed  Google Scholar 

  2. Mathieu B, Cêtre-Sossah C, Garros C, Chavernac D, Balenghien T, Vignes Lebbe R, et al. IIKC: An interactive identification key for female Culicoides (Diptera: Ceratopogonidae) from the West Palearctic region. Proceedings of the international congress Tools for Identifying Biodiversity: Progress and Problems: 20–22 September 2010; Paris. Vignes-Lebbe R: Nimis PL; 2010. p. 201–5.

  3. Mathieu B, Cetre-Sossah C, Garros C, Chavernac D, Balenghien T, Carpenter S, et al. Development and validation of IIKC: an interactive identification key for Culicoides (Diptera: Ceratopogonidae) females from the Western Palaearctic region. Parasit Vectors. 2012;5:137.

    Article  PubMed  PubMed Central  Google Scholar 

  4. Mellor P, Boorman J, Baylis M. Culicoides biting midges: their role as arbovirus vectors. Annu Rev Entomol. 2000;45(1):307–40.

    Article  CAS  PubMed  Google Scholar 

  5. Carpenter S, Lunt HL, Arav D, Venter GJ, Mellor PS. Oral susceptibility to bluetongue virus of Culicoides (Diptera: Ceratopogonidae) from the United Kingdom. J Med Entomol. 2006;43(1):73–8.

    Article  PubMed  Google Scholar 

  6. De Liberato C, Scavia G, Lorenzetti R, Scaramozzino P, Amaddeo D, Cardeti G, et al. Identification of Culicoides obsoletus (Diptera: Ceratopogonidae) as a vector of bluetongue virus in central Italy. Vet Rec. 2005;156(10):301–4.

    Article  CAS  PubMed  Google Scholar 

  7. Savini G, Goffredo M, Monaco F, Di Gennaro A, Cafiero MA, Baldi L, et al. Bluetongue virus isolations from midges belonging to the Obsoletus complex (Culicoides, Diptera: Ceratopogonidae) in Italy. Vet Rec. 2005;157(5):133–9.

    Article  CAS  PubMed  Google Scholar 

  8. Carpenter S, Szmaragd C, Barber J, Labuschagne K, Gubbins S, Mellor P. An assessment of Culicoides surveillance techniques in northern Europe: have we underestimated a potential bluetongue virus vector? J Appl Ecol. 2008;45(4):1237–45.

    Google Scholar 

  9. Elbers A, Meiswinkel R, van Weezep E. Sloet van Oldruitenborgh-Oosterbaan M, Kooi E. Schmallenberg virus detected by RT-PCR in Culicoides biting midges captured during the 2011 epidemic in the Netherlands. Emerg Infect Dis. 2013;19:106–9.

    Article  PubMed  PubMed Central  Google Scholar 

  10. Meiswinkel R, Scolamacchia F, Dik M, Mudde J, Dijkstra E, Van Der Ven IJ, et al. The Mondrian matrix: Culicoides biting midge abundance and seasonal incidence during the 2006–2008 epidemic of bluetongue in the Netherlands. Med Vet Entomol. 2014;28(1):10–20.

    Article  CAS  PubMed  Google Scholar 

  11. Koenraadt CJ, Balenghien T, Carpenter S, Ducheyne E, Elbers AR, et al. Bluetongue, Schmallenberg - what is next? Culicoides-borne viral diseases in the 21st Century. BMC Vet Res. 2014;10:77.

    Article  PubMed  PubMed Central  Google Scholar 

  12. Goffredo M, Meiswinkel R. Entomological surveillance of bluetongue in Italy: methods of capture, catch analysis and identification of Culicoides biting midges. Vet Ital. 2003;40(3):260–5.

    Google Scholar 

  13. Purse B, Tatem A, Caracappa S, Rogers D, Mellor P, Baylis M, et al. Modelling the distributions of Culicoides bluetongue virus vectors in Sicily in relation to satellite-derived climate variables. Med Vet Entomol. 2004;18(2):90–101.

    Article  CAS  PubMed  Google Scholar 

  14. Takken W, Knols BG. Emerging pests and vector-borne diseases in Europe, vol. 1. Wageningen: Wageningen Academic Publishers; 2007.

  15. Carpenter S, Wilson A, Mellor P. Bluetongue virus and Culicoides in the UK: the impact of research on policy. Outlooks Pest Manag. 2009;20(4):161–4.

    Article  Google Scholar 

  16. Hoffmann B, Bauer B, Bauer C, Batza HJ, Beer M, Clausen PH, et al. Monitoring of putative vectors of bluetongue virus serotype 8, Germany. Emerg Infect Dis. 2009;15(9):1481–4.

    Article  PubMed  PubMed Central  Google Scholar 

  17. Ander M, Meiswinkel R, Chirico J. Seasonal dynamics of biting midges (Diptera: Ceratopogonidae: Culicoides), the potential vectors of bluetongue virus, in Sweden. Vet Parasitol. 2012;184(1):59–67.

    Article  CAS  PubMed  Google Scholar 

  18. Wilson AJ, Mellor PS. Bluetongue in Europe: past, present and future. Philos Trans R Soc Lond, Ser B: Biol Sci. 2009;364(1530):2669–81.

    Article  Google Scholar 

  19. Balenghien T, Pagès N, Goffredo M, Carpenter S, Augot D, Jacquier E. The emergence of Schmallenberg virus across Culicoides communities and ecosystems in Europe. Prev Vet Med. 2014;116(4):360–9.

    Article  PubMed  Google Scholar 

  20. World Organisation for Animal Health. OIE-Listed diseases, infections and infestations in force in 2017. 2017. http://www.oie.int/en/animal-health-in-the- world/oie-listed-diseases-2017/. Accessed 08 Aug 2017.

    Google Scholar 

  21. Wernike K, Eschbaumer M, Breithaupt A, Hoffmann B, Beer M. Schmallenberg virus challenge models in cattle: infectious serum or culture-grown virus? Vet Res. 2012;43(1):1.

    Article  Google Scholar 

  22. Gubbins S, Richardson J, Baylis M, Wilson AJ, Abrahantes JC. Modelling the continental-scale spread of Schmallenberg virus in Europe: approaches and challenges. Prev Vet Med. 2014;116(4):404–11.

    Article  PubMed  PubMed Central  Google Scholar 

  23. Veldhuis A, Santman-Berends I, Gethmann J, Mars M, Van Wuyckhuise L, Vellema P, et al. Schmallenberg virus epidemic: impact on milk production, reproductive performance and mortality in dairy cattle in the Netherlands and Kleve district, Germany. Prev Vet Med. 2014;116(4):412–22.

  24. Van Schaik G, Berends I, Hv L, Elbers A, Vellema P. Seroprevalence of bluetongue serotype 8 in cattle in the Netherlands in spring 2007, and its consequences. Vet Rec. 2008;163(15):441–4.

    Article  CAS  PubMed  Google Scholar 

  25. Saegerman C, Martinelle L, Dal Pozzo F, Kirschvink N. Preliminary survey on the impact of Schmallenberg virus on sheep flocks in south of Belgium. Transbound Emerg Dis. 2014;61(5):469–72.

    Article  CAS  PubMed  Google Scholar 

  26. Wilson A, Mellor P. Bluetongue in Europe: vectors, epidemiology and climate change. Parasitol Res. 2008;103(1):69–77.

    Article  Google Scholar 

  27. Kiel E, Liebisch G, Focke R, Liebisch A. Monitoring of Culicoides at 20 locations in northwest Germany. Parasitol Res. 2009;105(2):351–7.

    Article  PubMed  Google Scholar 

  28. Venail R, Balenghien T, Guis H, Tran A, Setier-Rio ML, Delécolle JC, et al. Assessing diversity and abundance of vector populations at a national scale: example of Culicoides surveillance in France after bluetongue virus emergence. Arthropods Vector Emerg Dis. 2012;3:77–102.

    Article  Google Scholar 

  29. Fassotte C, Delecolle JC, Cors R, Defrance T, De Deken R, Haubruge E, et al. Culicoides trapping with Rothamsted suction traps before and during the bluetongue epidemic of 2006 in Belgium. Prev Vet Med. 2008;87(1–2):74–83.

    Article  CAS  PubMed  Google Scholar 

  30. González M, Baldet T, Delécolle JC, López S, Romón P, Goldarazena A. Monitoring of Culicoides Latreille (Diptera: Ceratopogonidae) after BTV outbreaks, in sheep farms and natural habitats from the Basque Country (Northern Spain). Proc Entomol Soc Wash. 2013;115(1):48–69.

    Article  Google Scholar 

  31. Kaufmann C, Steinmann IC, Hegglin D, Schaffner F, Mathis A. Spatio-temporal occurrence of Culicoides biting midges in the climatic regions of Switzerland, along with large scale species identification by MALDI-TOF mass spectrometry. Parasit Vectors. 2012;5:246.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  32. Venter GJ, Meiswinkel R. The virtual absence of Culicoides imicola (Diptera: Ceratopogonidae) in a light-trap survey of the colder, high-lying area of the eastern Orange Free State, South Africa, and implications for the transmission of arboviruses. Onderstepoort J Vet Res. 1994;61(4):327–40.

    CAS  PubMed  Google Scholar 

  33. Möhlmann TWR, Wennergren U, Tälle M, Favia G, Damiani C, Bracchetti L, et al. Community analysis on the abundance and diversity of mosquito species (Diptera: Culicidae) in three European countries at different latitudes. Parasit Vectors. 2017;10:510.

    Article  PubMed  PubMed Central  Google Scholar 

  34. EEA. Corine Land Cover. Copenhagen: Off Pub Euro Comm; 2000.

    Google Scholar 

  35. Nolan DV, Carpenter S, Barber J, Mellor PS, Dallas JF, Mordue AJ, et al. Rapid diagnostic PCR assays for members of the Culicoides obsoletus and Culicoides pulicaris species complexes, implicated vectors of bluetongue virus in Europe. Vet Microbiol. 2007;124(1):82–94.

    Article  CAS  PubMed  Google Scholar 

  36. Harrup L, Bellis G, Balenghien T, Garros C. Culicoides Latreille (Diptera: Ceratopogonidae) taxonomy: Current challenges and future directions. Infect Genet Evol. 2015;30:249–66.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  37. Oksanen J, Kindt R, Legendre P, O’Hara B, Simpson G, Stevens M, et al. Vegan: Community Ecology Package. R package version 2.9. 2009:2. http://CRAN.R-project.org/package=vegan

  38. Team RC. R: A language and environment for statistical computing. Vienna: R Foundation for Statistical Computing; 2015.

    Google Scholar 

  39. Young M, Scannell J, O'Neill M, Hilgetag C, Burns G, Blakemore C. Non-metric multidimensional scaling in the analysis of neuroanatomical connection data and the organization of the primate cortical visual system. Philos Trans R Soc Lond, Ser B: Biol Sci. 1995;348(1325):281–308.

    Article  CAS  Google Scholar 

  40. Jones R, Foster N. Oral infection of Culicoides variipennis with bluetongue virus: development of susceptible and resistant lines from a colony population. J Med Entomol. 1974;11(3):1.

    Article  Google Scholar 

  41. Nielsen SA, Kristensen M. Morphological and molecular identification of species of the Obsoletus group (Diptera: Ceratopogonideae) in Scandinavia. Parasitol Res. 2011;109(4):1133–41.

    Article  PubMed  Google Scholar 

  42. Elbers AR, Meiswinkel R. Culicoides (Diptera: Ceratopogonidae) host preferences and biting rates in the Netherlands: comparing cattle, sheep and the black-light suction trap. Vet Parasitol. 2014;205(1–2):330–7.

    Article  CAS  PubMed  Google Scholar 

  43. Naturalis Biodiversity Center. www.nederlandsesoorten.nl. Accessed 2 Jan 2018.

  44. Foxi C, Pinna M, Monteys VSI, Delrio G. An updated checklist of the Culicoides Latreille (Diptera: Ceratopogonidae) of Sardinia (Italy), and seasonality in proven and potential vectors for bluetongue virus (BTV). Proc Entomol Soc Wash. 2011;113(4):403–16.

    Article  Google Scholar 

  45. Gomulski L, Meiswinkel R, Delécolle JC, Goffredo M, Gasperi G. Phylogeny of the subgenus Culicoides and related species in Italy, inferred from internal transcribed spacer 2 ribosomal DNA sequences. Med Vet Entomol. 2006;20(2):229–38.

    Article  CAS  PubMed  Google Scholar 

  46. Kaufmann C, Schaffner F, Ziegler D, Pflueger V, Mathis A. Identification of field-caught Culicoides biting midges using matrix-assisted laser desorption/ionization time of flight mass spectrometry. Parasitology. 2012;139(2):248–58.

    Article  CAS  PubMed  Google Scholar 

  47. Kaufmann C, Ziegler D, Schaffner F, Carpenter S, Pflüger V, Mathis A. Evaluation of matrix-assisted laser desorption/ionization time of flight mass spectrometry for characterization of Culicoides nubeculosus biting midges. Med Vet Entomol. 2011;25(1):32–8.

    Article  CAS  PubMed  Google Scholar 

  48. Gomulski LM, Meiswinkel R, Delécolle J-C, Goffredo M, Gasperi G. Phylogenetic relationships of the subgenus Avaritia Fox, 1955 including Culicoides obsoletus (Diptera, Ceratopogonidae) in Italy based on internal transcribed spacer 2 ribosomal DNA sequences. Syst Entomol. 2005;30(4):619–31.

    Article  Google Scholar 

  49. Calistri P, Goffredo M, Caporale V, Meiswinkel R. The distribution of Culicoides imicola in Italy: application and evaluation of current Mediterranean models based on climate. Zoonoses Public Hlth. 2003;50(3):132–8.

    CAS  Google Scholar 

  50. Elbers A, Heuvel SJ, Meiswinkel R. Diel activity and preferred landing sites in Culicoides biting midges attacking Fjord horses. Entomol Exp Appl. 2016;160(3):272–80.

    Article  Google Scholar 

  51. Meiswinkel R, Elbers A. The dying of the light: crepuscular activity in Culicoides and impact on light trap efficacy at temperate latitudes. Med Vet Entomol. 2016;30(1):53–63.

    Article  CAS  PubMed  Google Scholar 

  52. Viennet E, Garros C, Lancelot R, Allene X, Gardes L, Rakotoarivony I, et al. Assessment of vector/host contact: comparison of animal-baited traps and UV-light/suction trap for collecting Culicoides biting midges (Diptera: Ceratopogonidae), vectors of Orbiviruses. Parasit Vectors. 2011;4:119.

    Article  PubMed  PubMed Central  Google Scholar 

  53. Elbers A, Meiswinkel R. Limited attractant range of the black-light suction trap for the capture of Culicoides biting midges (Diptera: Ceratopogonidae). J Appl Entomol. 2016;140(5):386–94.

    Article  Google Scholar 

  54. Probst C, Gethmann JM, Kampen H, Werner D, Conraths FJ. A comparison of four light traps for collecting Culicoides biting midges. Parasitol Res. 2015;114(12):4717–24.

    Article  PubMed  Google Scholar 

  55. Foxi C, Delrio G. Larval habitats and seasonal abundance of Culicoides biting midges found in association with sheep in northern Sardinia, Italy. Med Vet Entomol. 2010;24(2):199–209.

    Article  CAS  PubMed  Google Scholar 

  56. Zimmer J-Y, Saegerman C, Losson B, Beckers Y, Haubruge E, Francis F. Chemical composition of silage residues sustaining the larval development of the Culicoides obsoletus/Culicoides scoticus species (Diptera: Ceratopogonidae). Vet Parasitol. 2013;191(1):197–201.

    Article  CAS  PubMed  Google Scholar 

  57. Zimmer JY, Brostaux Y, Haubruge E, Francis F. Larval development sites of the main Culicoides species (Diptera: Ceratopogonidae) in northern Europe and distribution of coprophilic species larvae in Belgian pastures. Vet Parasitol. 2014;205(3–4):676–86.

    Article  PubMed  Google Scholar 

  58. Harrup L, Purse B, Golding N, Mellor P, Carpenter S. Larval development and emergence sites of farm-associated Culicoides in the United Kingdom. Med Vet Entomol. 2013;27(4):441–9.

    Article  CAS  PubMed  Google Scholar 

  59. Chaves LF, Hamer GL, Walker ED, Brown WM, Ruiz MO, Kitron UD. Climatic variability and landscape heterogeneity impact urban mosquito diversity and vector abundance and infection. Ecosphere. 2011;2(6):70.

    Article  Google Scholar 

  60. Roche B, Rohani P, Dobson AP, Guégan J-F. The impact of community organization on vector-borne pathogens. Am Nat. 2013;181(1):1–11.

    Article  PubMed  Google Scholar 

Download references

Acknowledgements

We would like to thank the students that helped collecting the field data; Rickard Pettersson from Sweden and Mahmod Hamdan from Italy. Farmers, nature area managers and home-owners in Sweden, the Netherlands and Italy that provided us with the essential locations needed for this research are acknowledged for their support. We also thank Marcel Dicke for providing comments on a previous version of this manuscript.

Funding

This study was part of the ANIHWA-EraNet (Animal Health and Welfare) program (LIVEepi) funded by the Ministry of Economic Affairs (project number 1300018161), the Netherlands, and the Swedish Research Council (FORMAS), Sweden. In Italy, the work was supported by grants from the Italian Ministry of Education, University and Research (MIUR) (Prin 2012 protocol 2012T85B3R). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.

Availability of data and materials

The dataset supporting the conclusions of this article is included within the article and its additional file.

Author information

Authors and Affiliations

  1. Laboratory of Entomology, Wageningen University and Research, P.O. Box 16, 6700, AA, Wageningen, the Netherlands

    Tim W. R. Möhlmann, Willem Takken & Constantianus J. M. Koenraadt

  2. IFM Theory and Modelling, Linköping University, 581 83, Linköping, Sweden

    Tim W. R. Möhlmann, Uno Wennergren & Malin Tälle

  3. Scuola di Bioscienze e Medicina Veterinaria, Università degli Studi di Camerino, 62032, Camerino, Italy

    Guido Favia, Claudia Damiani & Luca Bracchetti

Authors
  1. Tim W. R. Möhlmann
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Uno Wennergren
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Malin Tälle
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Guido Favia
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Claudia Damiani
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Luca Bracchetti
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Willem Takken
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. Constantianus J. M. Koenraadt
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

TWRM, UW, GF, WT and CJMK designed the study. TWRM, MT, CD and LB collected data. UW, GF, WT and CJMK provided funding and support for fieldwork. TWRM did morphological identifications, analysed data and drafted the manuscript. UW, MT, GF, CD, LB, WT and CJMK contributed to writing of the manuscript. All authors read and approved the final manuscript.

Corresponding author

Correspondence to Tim W. R. Möhlmann.

Ethics declarations

Ethics approval and consent to participate

Not applicable.

Consent for publications

Not applicable.

Competing interests

The authors declare that they have no competing interests.

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Additional files

Additional file 1:

Table S1. A list of the species per country found in this study. References to previous research of Culicoides fauna in the same countries are made, as well as remarks on the distribution of the species as described in the IIKC. (XLSX 14 kb)

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Möhlmann, T.W.R., Wennergren, U., Tälle, M. et al. Community analysis of the abundance and diversity of biting midge species (Diptera: Ceratopogonidae) in three European countries at different latitudes. Parasites Vectors 11, 217 (2018). https://doi.org/10.1186/s13071-018-2792-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/s13071-018-2792-x

Keywords

Parasites & Vectors

ISSN: 1756-3305

Contact us